In the Jungle

Hi all, today I have a funny little card.

I started by using a circle die to cut the hole in the front of the card. Then I stamped two Palm Trees.  The It's a jungle out there. use stamped on a separate piece of cs and sponged the edges. The Hang in there Monkey was stamped on the inside.

Then I stamped the top of the Palm Tree across the top with plenty of room to wright a note.

Have a wonderful day,

Janett

Anchor Birthday

Hi all,  I am back with a new DRS designs challenge. 

Naked Stamping

It's not what your thinking. It's stamping with out coloring.

I started by stamping the Anchor and the Small Birthday Wishes with Coco ink. The background was embossed in a embossing folder and I rubbed Nuvo Mousse over the top.

Join in the fun.

Have a wonderful day,

Janett

Sailing on the Tide of Love

Hi all, this card is for my oldest grandson he turned 16 on Friday, were has the time gone. To tell you what a great young man he is becoming he comes up in the morning and we go for a walk then talk over coffee. These talks are pure gold for me and I will treasure them for ever.

I made a shaker card. I started by stamping the Adirondack Chair coloring with Copic markers then die cutting with the inside the box technique. For the shaker part I use two sheets of acetate cut larger than the cut out. I used foam tape on all four sides then added the sequins and glitter then added the other sheet of acetate. I stamped the Sailboat then colored with Copic's. The Small 1 Line Happy Birthday was stamped and  die cut.

For the inside I use the Family and Friends Birthday Greeting and the 4 in 1 Seashells.

  On the back I used the one of my favorites Share My Heart. 

Have a wonderful day,

Janett

I have added this card to the following challenges.

Tuesday Morning Sketch 

Measure Up

Hello all, today is the new DRS designs challenge. 

The Challenge this week is a color challenge.

These are great summer colors.

I started by stamping the Ruler stamp around the border of the white layer. The Happy Shark was stamped on another piece of white cs and colored with Copic markers. I stamped the Wild Thing  die cut and colored with Copic markers. and attached it with POP dots. Everything was attached to a green card.

Join us for a chance to win a 20% off coupon to the DRS designs store.

Have a wonderful day,

Janett

Caught a bug

I started with a 4 1/4 x 5 1/2 top fold card. I cut the card base about 1 inch from the bottom then again at about 1 1/2 inches from the first cut. This will leave a gap for the die cut lattice to show. For the top part I stamped part of the Leafy Tree Branch,  Three Butterflies , and the butterfly from the 4 in 1 Garden Bugs. The sky was air brushed. On the bottom I stamped the One Line Caught A Bug.

On the inside I used the Caught A Bug Greeting

Have a wonderful day,

Janett

Puppy Paws

Hi all, the new DRS designs challenge is 

Pet's R Family Too

Do you know someone that has a new pet well DRS designs has the perfect stamp for you.

I started by stamping the New Pet Congratulations I covered it with a mask then stamped Wags the Dog were just his head would show. I colored him with Copic markers. For the background I repeatedly stamped the Small Dog Print to make the background.

For the inside I stamped the New Little Friend Pet Greeting then stamped the Small Dog Print across the bottom.

Join us in this fun challenge and you could win 20% off at the DRS designs store. 

 Have a wonderful day,

Janett

I have entered this card in the following challenges.

Stamp Ink Paper (black and white) 

Cabin in the woods

It has been so Hot here this summer I thought I would share something to help cool you down. 

                        A Christmas card                                                                                                           I have been trying to decide what I want to do for my Christmas card this year and I always try out several designs before I can settle on one.

Stamp the Christmas Village Cabin and the Picket Fence with Tuxedo Black and color with Copic markers. Cut with a circle die.  After coloring the fence brush a little Opaque White on the fence wiping  off a little leaving a wash effect, add dots in the sky. I Used the Brushable Glue to add the Bridal glitter. Stamp the Merry Christmas with Tumbled Glass Distress ink, die cut with a small circle. Brush a little glue around the edge add glitter. For the top white layer Stamp the Interlocking Snow Background with the Versa Mark and White Detail Embossing powder. The last white layer is embossed in a embossing folder.

Have a wonderful day,

Janett

Supplies:

DRS designs stamps: Christmas Village Cabin 212G, Small Merry Christmas 520D,

                                     Interlocking Snow Background 015H, Picket Fence 478P

Spellbinder Dies: Circles, Matting Basics A & B
Memento Ink Pad: Tuxedo Black

Distress Ink: Tumbled Glass

Versa Mark

Sparkle N Sprinkle: Bridal Simi Trans Glitter and White Detail Embossing Powder

                                Brushable Glue

Cuttlebug Embossing folder.

3 in 1 glue
Copic: E 15,31,35,39,57,59, - YG61,63,67 - G46 - B26 - Y11 - C6 Colorless Blender

Copic Opaque White.

I have entered this card in the following challenges.

Just for Fun Rubber Stamps

Deep Ocean Challenge Blog 

Stamp Ink Paper

Pink Flamingo

Hi all,

I started this card by stamping the Flamingo Palm Tree and coloring with Copic markers. It was layered on to pink card stock. I thought it needed more pink, so I used Brushable Glue and Semi-Trans Bubblegum pink glitter. Then on white card stock I used my finger to randomly spread Nuvo Embellish Mousse. Then I stamped the Wood Grain Background with Peacock Feather Distress Ink. I cut this into strips. On a piece of kraft card stock I used a Versa Mark along the edges then pink embossing powder. The wood strips were added over the top Then added Nuve Crystal Drops  (Neptune) along the edges. The Mousse was added to the edge of the card. The gauze was dyed with the Peacock Feather. I rubbed copper Embellish Mousse on to white card stock the stamped and black embossed the starfish from the 4 in 1 Seashells then fussy cut.

Have a wonderful day,

Janett




I have added this card to the following challenges.

Sparkle N Sprinkle

Cupcake Inspirations

bloglovin

<a href="http://www.bloglovin.com/blog/6255605/?claim=a54v7ekm69e">Follow my blog with Bloglovin</a>

Saddle Up

The new DRS designs challenge is ...

Hot Trends

(Creative Piercing)

For my card I made a easel card.

I stamp the Silhouette Horse and sponging the background.

It was die cut with a square stitched die.

I stamped and fussy cut this cute little cowboy

Saddle Up Cowboy 

Then stamping die cutting and sponging the 

Small 1 Line Happy Birthday

I stamped the 

Saddle UP Birthday Greeting 

Then die cut with a pierced square die and stitched with red thread around the edges.

Join us in the fun challenge.

Have a wonderful day,

Janett

Summers Wish

Hi all, today I have another summer card.

It's a I wish I was there kind of cards.

It's a inside the box card.

I started by stamping the Lighthouse and coloring with Copic markers.

On a separate piece of paper I stamped the 

new Sail boat.

And colored with Copic markers.

For the water and the sky I used 

Gelatos. The Lighthouse was attached with foam tape.

For the border I stamped the World Map Background and embossed with black embossing powder. Then colored with Gelatos.

Then I added some gauze and a braid.

Have a wonderful day

Janett

I have entered this card in the following challenges.

Serendipity Stamps

Color Q

Sail the world

Good Morning, I'm a little late getting this card posted. It's for the 

Tuesday Morning Sketch Blog

DRS designs is the sponsor this week.

This is the Sketch.

My take on the sketch.

I started by stamping the new Sail Boat then covering with a mask and stamping the World Map with Versa Mark ink and embossing with black embossing powder. The boat and land was colored with Copic markers the water was colored with Gelatos.

I stamped the Anchor colored with Copic and fussy cut. I die cut a Scalloped Circle and before removing from the die I used a white jell pen and traced around the inside. I added some twine with a knot. 

Join in the fun you could win a $10.00 voucher to the DRS designs store.

Have a wonderful day,

Janett